DAIICHI Carbon Rods are most suitable to quality Manganese-type Batteries.
Under the precise manufacturing process and severe qualtity control,
DAIICHI Carbon Rods are produced to meet the Battery Makers' demand
for longer service and shelf life of Batteries.
Now we distribute to the wolrd-wide Battery Makers both from our Yokohama
and Indonesian Factories.
|
SIZE |
Model | Dia. | Oil/Wax | Impreg. | Vent | Strength | Resistance |
| . | . | (mm) | . | (%) | (sec/0-40mmHg) | (kg/cm2) | (ohm cm) |
| R25, R20 | OIL | 8mm | OIL | 3 - 6 | 25 - 50 | 300 MIN | 0.0050 MAX |
| R25, R20 | WDHS | 8mm | WAX | 3 - 6 | 30 - 80 | 300 MIN | 0.0050 MAX |
| R25, R20 | WDH | 8mm | WAX | 5 - 8 | 80 -150 | 300 MIN | 0.0050 MAX |
| R25, R20 | W100 | 8mm | WAX | 7.5 MIN | Infinite | 300 MIN | 0.0050 MAX |
| R12, R14 | OIL | 6mm | OIL | 3 - 6 | 60 -100 | 300 MIN | 0.0050 MAX |
| R12, R14 | WDH | 6mm | WAX | 5 - 8 | 100 -200 | 300 MIN | 0.0050 MAX |
| R12, R14 | W100 | 6mm | WAX | 7.5 MIN | Infinite | 300 MIN | 0.0050 MAX |
| R6 | OIL | 4mm | OIL | 3 - 6 | 100 -150 | 300 MIN | 0.0050 MAX |
| R6 | W100 | 4mm | WAX | 7.5 MIN | Infinite | 300 MIN | 0.0050 MAX |
| R6 | SPW100 | 4mm | WAX | 7.5 MIN | Infinite | 300 MIN | 0.0024 MAX |
| R03 | SPW100 | 3mm | WAX | 7.5 MIN | Infinite | 300 MIN | 0.0024 MAX |
| 15x150S | OIL | 15mm | OIL | 3 - 6 | - | 150 MIN | 0.0050 MAX |
| 15x150S | WAX | 15mm | WAX | 5.0 MIN | - | 150 MIN | 0.0050 MAX |
|
SIZE |
Model | Dia. | Impreg. | Tolerance | Tollerance | Fixed | Ash | Iron | Surface |
| . | . | (mm) | (Oil/Wax) | (mm) | (mm) | Carbon(%) | (%) | (%) | Finish |
| R25, R20 | OIL | 8mm | OIL | }0.03 | }0.2 | 88 MIN | 12 MAX | 0.8 MAX | Rough |
| R25, R20 | WDHS | 8mm | WAX | }0.03 | }0.2 | 88 MIN | 12 MAX | 0.8 MAX | Rough |
| R25, R20 | WDH | 8mm | WAX | }0.03 | }0.2 | 88 MIN | 12 MAX | 0.8 MAX | Rough |
| R25, R20 | W100 | 8mm | WAX | }0.03 | }0.2 | 88 MIN | 12 MAX | 0.8 MAX | Rough |
| R12, R14 | OIL | 6mm | OIL | }0.03 | }0.2 | 88 MIN | 12 MAX | 0.8 MAX | Rough |
| R12, R14 | WDH | 6mm | WAX | }0.03 | }0.2 | 88 MIN | 12 MAX | 0.8 MAX | Rough |
| R12, R14 | W100 | 6mm | WAX | }0.03 | }0.2 | 88 MIN | 12 MAX | 0.8 MAX | Rough |
| R6 | OIL | 4mm | OIL | }0.03 | }0.2 | 88 MIN | 12 MAX | 0.8 MAX | Rough |
| R6 | W100 | 4mm | WAX | }0.03 | }0.2 | 88 MIN | 12 MAX | 0.8 MAX | Rough |
| R6 | SPW100 | 4mm | WAX | }0.03 | }0.2 | 97 MIN | 3 MAX | 0.2 MAX | Rough |
| R03 | SPW100 | 3mm | OIL | }0.03 | }0.2 | 88 MIN | 12 MAX | 0.8 MAX | Rough |
| 15x150S | OIL | 15mm | OIL | }0.03 | }0.2 | 88 MIN | 12 MAX | 0.8 MAX | Rough |
| 15x150S | WAX | 15mm | WAX | }0.03 | }0.2 | 88 MIN | 12 MAX | 0.8 MAX | Rough |
|
OIL |
Venting Type for Normal Pasted Batteries | WDHS | For both Pasted and Normal Paper-Lined Batteries | WDH | Non Venting type for Long life Paper-Lined Batteries | W100 | Excessive Gas Permission type for Long life Paper-Lined Batteries |
| Density | |
| 4mm | 1.50 - 1.70 g/cm3 |
| 6mm | 1.50 - 1.65 g/cm3 |
| 8mm | 1.50 - 1.65 g/cm3 |
|
Model |
Dia. | pcs./Carton Box |
| UM-1 | 7.95 - 8.00mm | 1,460pcs. |
| UM-2 | 6.00mm | 2,620pcs. |
| UM-2 | 6.08mm | 2,560pcs. |
| UM-3 | 4.00mm | 5,840pcs. |
| UM-3 | 4.12mm | 5,540pcs. |
| UM-3 | 4.50mm | 4,580pcs. |
| UM-3 | 4.07-4.09mm | 5,620pcs. |
| UM-4 | 3.00mm | 5,775pcs. |
| UM-5 | 3.00mm | 5,775pcs. |